Applications

Photographic

Motion Picture

TV Studio

Removes glaring highlights from polished surfaces in camera work. Coats evenly with a very fine spray pattern - it effectively dulls any polished object to be photographed.

Directions

Shake the can well, and whilst spraying, hold not more than 30cm (12 inches) from the object.

The spray sets in about 2 minutes, and further coats may be added if necessary. It wipes off easily with a soft cloth and all smears can be removed with a little spirit.

K-LINE spray is safe with most materials, but a test should be made on a scrap surface if in doubt, especially with some types of plastics.

Caution

Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50°C.Do not pierce or burn even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - NO SMOKING.

Keep out of reach of children. Do not breathe spray. Avoid contact with eyes. Use only in well ventilated areas. Store at a minimum of 20°C.

Material Safety Sheet

A comprehensive Material Safety Sheet relevant to this product is available by contacting

Size

400ml - Made in Britain

EXTREMELY FLAMMABLE